Install your scooter shopping basket with confidence. Watch the step-by-step video, download the drilling template for your scooter model, and follow the complete PDF guide.
Watch the complete scooter basket installation video before you begin. Follow each step at your own pace and feel confident before picking up a drill.
Download the official scooter basket installation manual and the precision drilling template for your scooter model.
Complete 7-step installation guide for mounting the shopping basket onto the scooter steering column. Includes all tool requirements and safety notes.
Download ManualPrint-to-scale template for the Kuarz scooter. Marks the exact hole positions on the steering column cover. Progressive drill sequence: 3, 8, then 13 mm.
Download TemplatePrint-to-scale template for the Eon-Sync scooter. Marks the exact hole positions on the steering column cover. Progressive drill sequence: 3, 8, then 13 mm.
Download TemplateImportant: Print drilling templates at exactly 100% scale (no fit-to-page). The template must be true size for accurate hole placement. Use masking tape to attach it; avoid strong adhesives that could mark the paint.
From template to tightened screw. Follow the video alongside these steps in order for a clean, professional result.
Gather everything on this list before you begin. Having all tools ready makes the installation smooth and safe.
Safety first. Switch off the scooter and park it on a stable, flat surface before starting. This installation requires basic DIY skills and should be performed by someone comfortable with power tools.
Pro tip. Use new or well-maintained drill bits for clean, accurate cuts. Work slowly with even pressure, especially when approaching the internal thread in Step 5.
Answers to the most common questions about installing the scooter shopping basket on your mobility scooter.
No. The basket attaches to an internal threaded post inside the steering column cover. Drilling is required to access this thread; there is no alternative mounting point.
No. This installation is specifically designed to work without removing or disassembling the steering column. You drill through the existing plastic cover from the outside.
Use the template that matches your scooter model. The hole positions differ between models; using the wrong template will result in misaligned holes. Check the model name on your scooter if you are unsure.
Always start with the 3 mm pilot bit. Then enlarge to 8 mm, and finally to 13 mm. Skipping the pilot hole risks cracking or splintering the plastic cover.
When drilling with the 13 mm bit you will feel a distinct change in resistance as the bit passes through the plastic and contacts the metal thread inside. Stop at this point and insert the fixation screw.
Resellers & healthcare professionals: please contact your Vermeiren Sales Representative.
End users: please contact your local shop or reseller.
